SV9641M4510 Standard Opening Intermittent Pilot with Comb Air Control
SKU: SV9641M4510/U
SV9641M4510 Standard Opening Intermittent Pilot with Comb Air Control
SKU: SV9641M4510/U
Gas Flow Control
The SmartValve™ system controls from Resideo combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. Suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters, and commercial cooking appliances.
Requires Pro for installation
Resources
Ignition Type | Intermittent Hot Surface Pilot Ignition |
---|---|
Type of Fuel | Natural Gas |
Regulation Type | Standard |
Capacity (Max) | 415 ft³/hr, 11.8 m³/hr |
Capacity (Min) | 30 ft³/hr, 0.8 m³/hr |
Operating Voltage | 24 Vac |
Inlet Connection Size | 3/4 in |
Inlet Connection Type | NPT |
Outlet Connection Size | 3/4 in |
Outlet Connection Type | NPT |
Pressure Regulator Set point | 3.5 in WC, 0.87 kPa |
Pressure Tap Connection Size | 1/8 in |
Pressure Tap Connection Type | NPT |
Typical Ignition Hardware | Q3450, Q3480 |
Ignition Trials To Lockout | Continuous Retry |
Pre-Purge | 15 seconds |
Universal | Yes |
For Use With | ST9160 and ST9162 Electronic Fan Timers |
This product must be installed by a qualified/licensed contractor and set up with properly calibrated test equipment. Failure to have the installation performed by a qualified professional could result in substantial property damage, and even severe personal injury or death, and Resideo will not be responsible for any damages or injuries resulting from not observing this warning.
Parts and Accessories
-
View All