VR8215S1503 24 Vac Standard Opening Direct Ignition Gas Valve
SKU: VR8215S1503/U
VR8215S1503 24 Vac Standard Opening Direct Ignition Gas Valve
SKU: VR8215S1503/U
Simple Gas Control
The VR8215 direct ignition gas valves from Resideo replace nearly all standard and slow-opening VR8205 and VR8215 controls. The VR8215 valve can be mounted in any orientation and the reduced installation turning radius makes it much easier to install. They are a great fit for tight and open applications.
Requires Pro for installation
VR8215S1503 24 Vac Standard Opening Direct Ignition Gas Valve
SKU: VR8215S1503/U
Resources
| Application | Single Stage |
|---|---|
| Ignition Type | Direct Ignition |
| Type of Fuel | Natural Gas |
| Regulator | Standard |
| Capacity (Max) | 200,000 BTU/h Natural Gas |
| Capacity (Min) | 20,000 BTU/h Natural Gas |
| Operating Voltage | 24 V AC |
| Inlet Connection Size | 1/2 in |
| Outlet Connection Size | 1/2 in |
| Regulation Type | Standard Opening |
| Pressure Rating | 1/2 psi, 3.5 kPa |
| Includes | Natural to LP Conversion Kit |
| Valve Body Pattern | Straight Through |
| Ambient Operating Temperature (Max) | 175 °F, 79 °C |
| Ambient Operating Temperature (Min) | -40 °F, -40 °C |
| Mounting Type | 0° to 90° in any direction from the upright position of the gas control knob, including vertically |
| Operating Frequency | 50 Hz, 60 Hz |
| Pilot Gas Outlet | None |
This product must be installed by a qualified/licensed contractor and set up with properly calibrated test equipment. Failure to have the installation performed by a qualified professional could result in substantial property damage, and even severe personal injury or death, and Resideo will not be responsible for any damages or injuries resulting from not observing this warning.
Product Overview
Combination gas controls for use with hot surface/direct spark systems in 24 Vac, gas-fired appliances with capacities from 30 to 415 cfh. The VR8215 valve can be mounted in any orientation and the reduced installation turning radius makes it much easier to install.
- Controls include manual valve, two automatic operators, and pressure regulator.
- Provide two automatic valves that function independently, allowing one to act as a failsafe for the other.
- Solenoid operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.
- Diaphragm operated second automatic valve opens under control of the regulator; closes if gas or power supply is interrupted.
- Meet codes requiring dual safety shutoff.
- Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.
- All adjustments, wiring connections and pilot outlet are accessible from top of control.
